Parts & Accessories
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes
The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes
All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap
Monitor your pedaling cadence and/or speed as you ride with these easy-to-install wireless sensors. Simply attach the sensors and ride. With no magnets or other exposed parts to line up, these sensors are easy to install, maintain and move between bikes. The cadence sensor fastens to any crank arm size and measures pedal strokes per minute so you can get the most out of your training. The speed sensor attaches to the hub of either wheel and self-calibrates with your Edge to give you accurate speed and distance at all times, including indoors on the turbo trainer. Combine them both and improve your personal best or see where your stand against the pros.
- Micro Mount for Phones - Aluminum and composite construction securely holds any phone with any case for minimalist profile - Unique patent-pending design with proprietary stretch material grips your phone - Easy mounting under any standard stem. - Tighten to stem cap 6Nm torque.
The ANT+ Micro USB adapter allows on-the-go devices (OTG), such as your Android phone or tablet, to connect to an ANT+ USB stick. Android OTG compatible devices require ANT+ Radio Service and ANT+ USB Service to be installed from the Google Play store. These services allow the adapter to work correctly with an ANT+ USB stick.
Connect your desktop to CycleOps VirtualTraining.
The BlueGiga dongle gives Rouvy, CycleOps' virtual training software, the ability to seamlessly connect to Bluetooth devices and sensors. The BlueGiga dongle contains a Bluetooth (BLE) radio that allows PCs to communicate with BLE devices, including CycleOps smart indoor bicycle trainers and power meters made by the folks at PowerTap. Most importantly, the BlueGiga dongle is necessary to update the firmware Over the Air (OTA) via VirtualTraining for the Hammer and Magnus bike trainers. - Bluetooth dongle for PCs to work with Rouvy - Needed for Over the Air Firmware Updates to Smart Indoor Bike Trainers. - Works with PC desktops and laptops.
Blendr is the ultimate system for clean and easy integrated installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr GoPro Mount for a clean, flush look that securely holds your GoPro in a centered location. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for GoPro camera - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
$3.99 - $5.99
Keep your computer and sensors ready for every ride with replacement batteries Key features: - CR2032 battery is used for most Trek and Bontrager computers - 23AE battery is used for the Bontrager Interchange Analog Wireless Sensor - LR44 and L1154 batteries are identical and used in Bontrager SpeedTrap Sensor
Connect ANT+ and Bluetooth Smart devices to all of the data available from the DuoTrap S sensor for your on-the-bike wireless needs. • ANT+ 2.4 GHz and Bluetooth Smart wireless digital speed and cadence sensor • ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone • For use with many ANT+ and Bluetooth Smart wireless technology enabled devices • Includes Bontrager wheel magnet, crank cadence band, and CR2032 battery • Works with Trek DuoTrap compatible bikes
Easily mount a cell phone and case directly to your bars for safe convenient access with the Insta-Mount and keep all of your favorite cycling and fitness apps safely accessible. • Mount your hard-shell smart phone case to your bike • Allows for easy access of phone on stem or handlebar • Includes Insta-Mount, universal mount, and application grid • Blendr-compatible
Get more data from your rides with the Bontrager Interchange digital combo speed and cadence sensor. This ANT+ 2.4 Ghz is designed to work with Bontrager Node wireless computers. It also works with many other ANT+ enabled devices. Sensor adjustment is easy with the adjustable arm. • ANT+ 2.4 Ghz and Bluetooth Smart wireless digital speed and cadence sensor • ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone • For use with many ANT+ and Bluetooth Smart wireless technology enabled devices • Independently adjustable arm for precise alignment of speed and cadence sensors • Includes Bontrager wheel magnet and crank cadence band • Includes silicone mounting strap to fit most chainstays and CR2032 battery • Visit www.thisisant.com/directory/ for compatible ANT+ devices • Visit www.bluetooth.com/pages/bluetooth-smart-devices.aspx for compatible Bluetooth devices
Bontrager's Interchange ANT+ Cadence Sensor is a cadence sensor that wirelessly transmits your data to a variety of ANT+ enabled receiving devices including Bontrager Node computers (sold separately). It includes a 5mm crank cadence band magnet and a silicone mounting strap to fit most chainstays, making installation a snap.
Product details - Provides infinite angle adjustment allowing for your preferred computer placement - Compatible with 31.8mm handlebars
- 1/8Th turn mounting system so your computer/Watch screen is always at proper orientation to rider when mounted to tt/Tri bars - For use with Garmin Edge 200/500/800 Computers and Forerunner 310xt and 910xt (Forerunner quick release kit is required- Each of them have a specific kit) - Delrin material will not damage bars or computer (Flexible to open around bars) - 22.2Mm clamp diameter (Fits all major tt extensions) - Mounting positions on inside and outside of aero extensions - Compatible with hydration systems and center bottle mounts
OEM CR2032 3V Lithium Battery used in most CatEye cycle computers.
Page 1 of 1